Study of Titanium-Silver Monolayer and Multilayer Films for Protective Applications in Biomedical Devices.

The search for coatings that extend the useful life of biomedical devices has been of great interest, and titanium has been of great relevance due to its innocuousness and low reactivity. This study contributes to the investigation of Ti/Ag films in different configurations (monolayer and multilayer) deposited by magnetron sputtering. The sessile droplet technique was applied to study wettability; greater film penetrability was obtained when Ag is the external layer, conferring high efficiency in cell adhesion. The morphological properties were characterized by SEM, which showed porous nuclei on the surface in the Ag coating and crystals embedded in the Ti film. The structural properties were studied by XRD, revealing the presence of TiO2 in the anatase crystalline phase in a proportion of 49.9% and the formation of a silver cubic network centered on the faces. Tafel polarization curves demonstrated improvements in the corrosion current densities of Ag/Ti/Ag/Ti/Ag/Ti/Ag/Ti and Ti/Ag compared to the Ag coating, with values of 0.1749, 0.4802, and 2.044 nA.m-2, respectively. Antimicrobial activity was evaluated against the bacteria Pseudomonas aeruginosa and Bacillus subtilis and the yeasts Candida krusei and Candida albicans, revealing that the Ti/Ag and Ag/Ti/Ag/Ti/Ag/Ti/Ag/Ti coatings exhibit promise in biomedical material applications.

Stable Fabrication of Zwitterionic Coating Based on Copper-Phenolic Networks on Contact Lens with Improved Surface Wettability and Broad-Spectrum Antimicrobial Activity.

Ocular dryness and contact lens(CL)-related microbial keratitis (MK) are two major risks of wearing CLs. The development of multifunctional surface coating for CLs with excellent hydrating and antimicrobial properties is a practical strategy to improve the comfort of CL wearers and to prevent corneal infection. Here, we develop zwitterionic and antimicrobial metal-phenolic networks (MPNs) based on the coordination of copper ions (CuII) and the poly(carboxylbetaine-co-dopamine methacrylamide) copolymer (PCBDA), which can be easily one-step prepared onto CLs due to the near-universal adherent properties of catechol groups. The zwitterionic and antifouling carboxybetaine (CB) groups of the CuII-PCBDA coating can significantly increase the wettability of CLs and reduce their protein adsorptions, resulting in a lens surface that is more water retentive and with lower protein binding to prevent tear film evaporation and eye dryness. In addition, since the immobilized copper ions in the MPNs impart them with ion-mediated antimicrobial activity, the CuII-PCBDA coating exhibits a strong and broad-spectrum antimicrobial activity against MK related pathogenic microbes, including bacteria, such as Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus, and fungi, such as Candida albicans. Compared with a pristine CL, the CuII-PCBDA-coated CL effectively inhibited biofilm formation even after daily exposure to the above microbial environment for 14 days. Notably, the CuII-PCBDA coating developed in this study is not only biocompatible with 100% cell viability following direct contact with human corneal epithelial cells (HCECs) for 48 h but also maintains the optical clarity of the native CLs. Thus, the CuII-PCBDA coating has a great application potential for the development of a multifunctional surface coating for CLs for increased CL comfort and prevention of MK.

Fabrication and characterization of one high-hygroscopicity liquid starch-based mulching materials for facilitating the growth of plant.

One high-performance liquid starch-based mulching materials (LSMM) was successfully fabricated by grafting polyacrylic acid (PAA) onto starch then crosslinking with N,N'-methylene-bisacrylamide (MBA). The effects of the dosage of acrylic acid on the performances of LSMM film had been explored. The LSMM was characterized by FTIR, solid state 13C NMR, XRD and SEM. Their application performances by spraying the LSMM on the soil surface also had been discussed. The PAA grafted onto starch significantly improved the properties of LSMM film (tensile strength 20.89 MPa, elongation at break 59.19 %, water absorbency 68.58 g/g and solubility in water 4.5 %). The PAA broke the hydrogen bonds and reduced the crystallinity of starch molecule, which can form the compact structure in LSSM film. As a result, the LSMM showed excellent relative hygroscopicity, water retention, degradability (weight loss 72.61 %) and the effect of facilitating the growth and germination ratio (84.00 %) of lettuce.

The Potential Risk Assessment of Phenoxyethanol with a Versatile Model System.

In this study, the toxic effects of phenoxyethanol (Phy-Et), which is widely used in cosmetic industry, has been investigated with Allium test by means of physiological, cytogenetic, anatomical and biochemical parameters. To determine the changes in physiological reactions weight gain, relative injury rate, germination percentage and root length were investigated. Malondialdehyde, superoxide dismutase, glutathion and catalase levels were analyzed as biochemical parameters for determining the presence of oxidative stress. Mitotic index, micronucleus and chromosomal abnormality frequencies were studied as cytogenetic evaluation and the anatomical changes in root tip cells were investigated by cross sections. Changes in surface polarity and wettability were investigated by taking contact angle measurements of pressed root preparations. The mechanism of toxicity has been tried to be explained by these contact angles and this is the first study using contact angle measurements in toxicity tests. Consequently, exposure to Phy-Et resulted in a decrease in all measured physiological parameters and in mitotic index. In contrast, significant increases in the micronucleus and chromosomal abnormality frequencies were observed and the most significant toxic effect was found in 10 mM Phy-Et treated group. Phy-Et application induced oxidative damage and caused a significant increase in malondialdehyde level and a decrease in glutathione level compared to control group. Also a response occured against oxidative damage in superoxide dismutase and catalase activity and the activities increased in 2.5 mM and 5 mM Phy-Et treated groups and decreased in 10 mM Phy-Et treated groups. Furthermore, Phy-Et treatment resulted in some anatomical damages and changes such as necrosis, cell deformation and thickening of the cortex cell wall in root tip meristem cells of A. cepa. In the contact angle measurements taken against water, it was found that the wettability and hydrophilicity of the root preparations treated with Phy-Et were reduced, and this was the explanation of the growth abnormalities associated with water uptake. As a result, it was found that Phy-Et application caused toxic effects on many viability parameters and A. cepa test material was a reliable biomarker in determining these effects.

Effect of Different Crosslinking Strategies on Physical Properties and Biocompatibility of Freestanding Multilayer Films Made of Alginate and Chitosan.

Freestanding multilayer films prepared by layer-by-layer technique have attracted interest as promising materials for wound dressings. The goal is to fabricate freestanding films using chitosan (CHI) and alginate (ALG) including subsequent crosslinking to improve the mechanical properties of films while maintaining their biocompatibility. Three crosslinking strategies are investigated, namely use of calcium ions for crosslinking ALG, 1-ethyl-3-(-3-dimethylaminopropyl) carbodiimide combined with N-hydroxysuccinimide for crosslinking ALG with CHI, and Genipin for crosslinking chitosan inside the films. Different characteristics, such as surface morphology, wettability, swelling, roughness, and mechanical properties are investigated showing that films became thinner, exhibited rougher surfaces, had lower water uptake, and increased mechanical strength after crosslinking. Changes of wettability are moderate and dependent on the crosslinking method. In vitro cytotoxicity and cell attachment studies with human dermal fibroblasts show that freestanding CHI-ALG films represent a poorly adhesive substratum for fibroblasts, while studies using incubation of plastic-adherent fibroblast beneath floating films show no signs of cytotoxicity in a time frame of 7 days. Results from cell experiments combined with film characteristics after crosslinking, indicate that crosslinked freestanding films made of ALG and CHI may be interesting candidates for wound dressings.

The use of hydrophobic amino acids in protecting spray dried trehalose formulations against moisture-induced changes.

Trehalose is commonly used as a protein stabilizer in spray dried protein formulations delivered via the pulmonary route. Spray dried trehalose formulations are highly hygroscopic, which makes them prone to deliquescence and recrystallization when exposed to moisture, leading to impairment in aerosolization performance. The main aim of this study was to investigate and compare the effect of hydrophobic amino acids (i.e. L-leucine and L-isoleucine) in enhancing aerosolization performance and in mitigating moisture-induced changes in spray dried trehalose formulations. Trehalose was spray dried with 20-60% w/w of amino acid (i.e. L-leucine or L-isoleucine). The spray dried formulations were stored at 25 °C/50% RH for 28 days. Solid state characterization and in vitro aerosolization performance studies were performed on the spray dried formulations before and after storage. The addition of 20-60% w/w of amino acid (i.e. L-leucine or L-isoleucine) improved the emitted fractions of spray dried trehalose formulations from a dry powder inhaler. However, ≥ 40% w/w of L-leucine/L-isoleucine was needed to prevent recrystallization of trehalose in the formulations when exposed to 25 °C/50% RH for 28 days. X-ray photoelectron spectroscopy (XPS) demonstrated that samples with 40-60% w/w L-isoleucine had more amino acid on the surfaces of the particles compared to their L-leucine counterparts. This may explain the greater ability of the L-isoleucine (40-60% w/w) samples to cope with elevated humidity compared to L-leucine samples of the same concentrations, as observed in the dynamic vapour sorption (DVS) studies. In conclusion, this study demonstrated that both L-leucine and L-isoleucine were effective in enhancing aerosolization performance and mitigating moisture-induced reduction in aerosolization performance in spray dried trehalose formulations. L-isoleucine proved to be superior to L-leucine in terms of its moisture protectant effect when incorporated at the same concentration in the formulations.

Videokeratoscopic assessment of silicone hydrogel contact lens wettability using a new in-vitro method.

PURPOSE: The aim of the study was to assess the surface wettability of new-generation silicone hydrogel (SiH) contact lenses (CLs) videokeratoscopically using a new in-vitro method under office conditions. METHOD: Videokeratoscopic methodology was used to compare time-dependent CL wettability on an in-vitro cornea model. The model cornea was a polished chrome surface coating a Teflon form. It was prepared with a base curve of 8.7 mm and a diameter of 15 mm. Laboratory temperature and humidity were controlled. Before and after placing CLs on the on the model cornea, Bausch + Lomb Biotrue® multi-purpose solution (MPS) was dropped to simulate the pre-lens and post-lens film layer. Fanfilcon A, Senofilcon A, Samfilcon A, and Lotrafilcon B CLs with -3.00D were used, and images were taken with the videokeratoscopic method for testing. In the control group, the same procedure was performed without placing CLs. The images of CLs at 0, 60, 90, 120, 150, and 180 s were taken. Distortions and gaps seen in rings were recorded. The areas in rings were calculated in pixels using ImageJ. RESULTS: When CLs were examined, statistical differences were found among average pixel values (p < 0,001). The average pixel value was 131877.4 in the Samfilcon group, 116125.5 in the Senofilcon group, 137893.2 in the Fanfilcon group, 125578.3 in the Lotrafilcon group, and 124984.6 in the control group. No difference was found between the average values of the Lotrafilcon group and the control group. Differences were found between the average values of all other groups. DISCUSSION: The results obtained showed that videokeratoscopy was an effective method for in-vitro testing of CL wettability. It was found that SiH lenses displayed different performance under office conditions depending on materials and technologies used for wetting the lens surface. It was shown that lens surface wettability could be measured with a repeatable and new method when the factors affecting surface wetness and image quality were ruled out.

Development of Gelatin-Alginate Hydrogels for Burn Wound Treatment.

Hydrogels are interesting as wound dressing for burn wounds to maintain a moist environment. Especially gelatin and alginate based wound dressings show strong potential. Both polymers are modified by introducing photocrosslinkable functionalities and combined to hydrogel films (gel-MA/alg-MA). In one protocol gel-MA films are incubated in alg-MA solutions and crosslinked afterward into double networks. Another protocol involves blending both and subsequent photocrosslinking. The introduction of alginate into the gelatin matrix results in phase separation with polysaccharide microdomains in a protein matrix. Addition of alg(-MA) to gel-MA leads to an increased swelling compared to 100% gelatin and similar to the commercial Aquacel Ag dressing. In vitro tests show better cell adhesion for films which have a lower alginate content and also have superior mechanical properties. The hydrogel dressings exhibit good biocompatibility with adaptable cell attachment properties. An adequate gelatin-alginate ratio should allow application of the materials as wound dressings for several days without tissue ingrowth.

Surfactin application for a short period (10/20 s) increases the surface wettability of sound dentin.

The aim of this study was to evaluate the effect of spreading the lipopeptide surfactin, for short time (10/20 s), on dentin wettability. Study groups were surfactin: 2.8; 1.4; 0.7; 0.35; and 0.175 mg/mL and a control group that received no treatment. Dentin discs (4 mm height) were prepared and polished with 600-grit SiC paper. Contact angle determinations were carried out after microbrush spreading of surfactin on dentin specimens for, respectively, 10 and 20 s. Excess liquid was removed, and after 60 s, the specimens were analyzed in a goniometer using the sessile drop method to measure the contact angle. Results were analyzed by two-way ANOVA (concentration × time) and t student, with α = 0.05. Lower contact angles were obtained for surfactin (0.7 mg/mL) spread for 10 s. However, no statistical difference was observed for surfactin (2.8 mg/mL) applied during 20 s. Higher contact angles were observed for surfactin (0.7 mg/mL) spread for 20 s. In conclusion, dentin wettability is dependent on spreading time and surfactin concentration.

The Effects of ß-Lactam Antibiotics on Surface Modifications of Multidrug-Resistant Escherichia coli: A Multiscale Approach.

Possible multidrug-resistant (MDR) mechanisms of four resistant strains of Escherichia coli to a model ß-lactam, ampicillin, were investigated using contact angle measurements of wettability, crystal violet assays of permeability, biofilm formation, fluorescence imaging, and nanoscale analyses of dimensions, adherence, and roughness. Upon exposure to ampicillin, one of the resistant strains, E. coli A5, changed its phenotype from elliptical to spherical, maintained its roughness and biofilm formation abilities, decreased its length and surface area, maintained its cell wall integrity, increased its hydrophobicity, and decreased its nanoscale adhesion to a model surface of silicon nitride. Such modifications are suggested to allow these cells to conserve energy during metabolic dormancy. In comparison, resistant strains E. coli D4, A9, and H5 elongated their cells, increased their roughness, increased their nanoscale adhesion forces, became more hydrophilic, and increased their biofilm formation upon exposure to ampicillin. These results suggest that these strains resisted ampicillin through biofilm formation that possibly introduces diffusion limitations to antibiotics. Investigations of how MDR bacterial cells modify their surfaces in response to antibiotics can guide research efforts aimed at designing more effective antibiotics and new treatment strategies for MDR bacterial infections.

Effects of Polymer/Surfactant as Carriers on the Solubility and Dissolution of Fenofibrate Solid Dispersion.

The purpose of this work is to investigate the effects of polymer/surfactant as carriers on the solubility and dissolution of fenofibrate solid dispersions (FF SDs) with the aid of systematic research on the physicochemical properties of the polymer/surfactant system and further highlight the importance of studying polymer/surfactant interaction in the preformulation. The critical micelle concentration (CMC) of sodium lauryl sulfate (SLS) and critical aggregation concentration (CAC) of polymer/SLS solutions were obtained through conductivity measurement. Meanwhile, surface tension, viscosity, morphology, and wettability of polymer/SLS with different weight ratios of SLS were analyzed to screen out the suitable content of SLS (weight%, 5% in carriers) incorporated in SDs. Polymer/SLS coprecipitate and FF SDs were prepared by the solvent evaporation method. The results from differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analysis showed that FF was molecularly dispersed in SDs. Compared to the solubility of FF in povidone/SLS (PVP/SLS) solutions, the increment of FF solubility in copovidone/SLS (VA64/SLS) solutions was due to the formation of free SLS micelles, which have been confirmed by transmission electron microscopy (TEM). Particularly, the wettability of FF SDs and physical mixtures (PMs) was also determined by the sessile drop technique. A linear relationship between the wettability of carriers and that of FF SDs was found, which revealed the significant role of carriers on the surface composition of FF SDs. As the molecular weight of PVP increased, the wettability of carriers decreased, thus leading to the reduction of the dissolution rate of SDs. Although the presence of SLS did not enhance the dissolution of FF SDs, it increased the amount of drug released at the initial stage. All these results indicated that the polymer/SLS interaction would affect the performance of SDs; hence, it was necessary to study their properties in the preformulation.

Influence of Surfactants and Fluoride against Enamel Erosion.

This study investigated the effect of surfactants associated with sodium fluoride (NaF) on enamel erosion prevention, using an erosion-remineralization in vitro model. Sodium lauryl sulfate (SLS), polysorbate 20 (P20), and cocoamidopropyl betaine (CAPB) were tested, at concentrations of 1.0 and 1.5%, and associated or not with NaF (275 ppm). The control groups were distilled water and the NaF solution. Bovine enamel samples (n = 12) were prepared and submitted to a 5-day cycling model: acid challenge (0.3% citric acid, pH 2.6, 4×/day), human saliva (2 h, 4×/day), and the treatment solutions (2 min, 2×/day). The protective potential of the agents against initial erosion was assessed by microhardness and the surface loss by profilometry. Enamel surface wettability was determined by goniometry, protein adsorption was measured by spectroscopy (FTIR), and the KOH-soluble fluoride was quantified. Goniometry showed that SLS and CAPB increased enamel wettability. No differences were found among the surfactants regarding protein adsorption. Microhardness showed that SLS reduced NaF protection. P20 (1 and 1.5%) and CAPB 1.5% presented a protective effect, but lower than the NaF solution. Profilometry showed that CAPB protected enamel, but no agent associated with NaF promoted a higher protection than the NaF solution alone. KOH-soluble fluoride analysis showed that all surfactants reduced the fluoride adsorption on the enamel surface. Therefore, the surfactants tested (except for P20) changed the enamel surface energy. The SLS decreased the protective potential of NaF on initial erosion, but no tested agent interfered with the protective effect of NaF on enamel erosive wear.

Synergistic effects of wheat straw powder and persulfate/Fe(II) on enhancing sludge dewaterability.

The effects of wheat straw powder (WSP) used as physical conditioner on sludge dewatering was investigated under sodium persulfate (SPS)/Fe(II) oxidation. Sludge dewatering performance in terms of capillary suction time (CST), specific resistance to filtration (SRF) and moisture content (MC) was enhanced with increasing WSP and SPS dosages. The results showed presence of synergistic effect in WSP and SPS conditioning system, with sludge CST and SRF reduced by 43.9% and 65.6%, respectively, after dosing 0.75 g/g DS (dry solid) WSP, 120 mg/g DS SPS and 33 mg/g DS Fe(II), indicating that sludge dewatering became more easily. Correspondingly, bound water was released and decreased from 5.75 g/g DS to 1.5 g/g DS and deep dewatered sludge MC reached to 58.2% under 2 MPa pressure. Mechanically, tightly bound extracellular polymeric substances (TB-EPS) with larger molecular weights were oxidized and degraded into loosely bound-EPS (LB-EPS) and soluble organic matter with smaller molecular weights by SPS/Fe(II). Additionally, the organic matters released from or still in WSP was also oxidized resulting in more channels and less fine particles.

Mechanism for the Reduced Dissolution of Ritonavir Tablets by Sodium Lauryl Sulfate.

Sodium lauryl sulfate (SLS) is an anionic surfactant widely used in pharmaceutical research as a dissolution enhancer for poorly soluble drugs. When SLS was used in ritonavir (RTV) tablet formulation to improve wetting, dissolution of RTV was surprisingly deteriorated in acidic media. To understand this unexpected phenomenon, a systematic investigation, including solubility determination, intrinsic dissolution rate measurement, dissolution in an artificial stomach and duodenum apparatus, and solid-state characterization, revealed the formation of a poorly soluble salt, [RTV2+][LS-]2, in an acidic environment. Solubilization of the poorly soluble RTV salt was observed when the concentration of SLS exceeded the critical micelle concentration. Thus, precipitation of [RTV2+][LS-]2 at a low pH and in presence of a low SLS concentration can lead to deteriorated bioavailability. This unintended negative effect on dissolution should be carefully considered when using SLS in a tablet formulation of a basic drug that can be ionized in gastric fluid.

Topographical alterations render bacterial biofilms susceptible to chemical and mechanical stress.

For the inactivation or removal of bacterial biofilms via chemical or physical processes, it is crucial to sufficiently wet the biofilm surface. However, many bacterial biofilms efficiently resist wetting by water, oil or even organic solvents. Here, we demonstrate how exposing the surface of mature biofilm colonies to concentrated ethanol, saline or glucose solutions results in topographical changes that enable their wettability. With this approach, even omniphobic biofilm colonies become wettable towards aqueous solutions and oils. As a result of this reduced liquid repellency, the biofilms become susceptible to erosion by water which allows for their removal from the substrate they have been grown on. Moreover, bacteria within pre-treated biofilms can now be inactivated with antibiotic solutions. Thus, the biofilm treatment strategy presented here presents a new stepping stone for fighting biofilms in either industrial or medical settings.

Facile and Versatile Modification of Cotton Fibers for Persistent Antibacterial Activity and Enhanced Hygroscopicity.

Natural fibers with functionalities have attracted considerable attention. However, developing facile and versatile strategies to modify natural fibers is still a challenge. In this study, cotton fibers, the most widely used natural fibers, were partially oxidized by sodium periodate in aqueous solution, to give oxidized cotton fibers containing multiple aldehyde groups on their surface. Then poly(hexamethylene guanidine) was chemically grafted onto the oxidized cotton fibers forming Schiff bases between the terminal amines of poly(hexamethylene guanidine) and the aldehyde groups of oxidized cotton fibers. Finally, carbon-nitrogen double bonds were reduced by sodium cyanoborohydride, to bound poly(hexamethylene guanidine) covalently to the surface of cotton fibers. These functionalized fibers show strong and persistent antibacterial activity: complete inhibition against Escherichia coli and Staphylococcus aureus was maintained even after 1000 consecutive washing in distilled water. On the other hand, cotton fibers with only physically adsorbed poly(hexamethylene guanidine) lost their antibacterial activity entirely after a few washes. According to Cell Counting Kit-8 assay and hemolytic analysis, toxicity did not significantly increase after chemical modification. Attributing to the hydrophilicity of poly(hexamethylene guanidine) coatings, the modified cotton fibers were also more hygroscopic compared to untreated cotton fibers, which can improve the comfort of the fabrics made of modified cotton fibers. This study provides a facile and versatile strategy to prepare modified polysaccharide natural fibers with durable antibacterial activity, biosecurity, and comfortable touch.

Wetting Transitions of Liquid Gallium Film on Nanopillar-Decorated Graphene Surfaces.

Molecular dynamics (MD) simulation has been employed to study the wetting transitions of liquid gallium droplet on the graphene surfaces, which are decorated with three types of carbon nanopillars, and to explore the effect of the surface roughness and morphology on the wettability of liquid Ga. The simulation results showed that, at the beginning, the Ga film looks like an upside-down dish on the rough surface, different from that on the smooth graphene surface, and its size is crucial to the final state of liquid. Ga droplets exhibit a Cassie⁻Baxter (CB) state, a Wenzel state, a Mixed Wetting state, and a dewetting state on the patterned surfaces by changing distribution and the morphology of nanopillars. Top morphology of nanopillars has a direct impact on the wetting transition of liquid Ga. There are three transition states for the two types of carbon nanotube (CNT) substrates and two for the carbon nanocone (CNC) one. Furthermore, we have found that the substrates show high or low adhesion to the Ga droplet with the variation of their roughness and top morphology. With the roughness decreasing, the adhesion energy of the substrate decreases. With the same roughness, the CNC/graphene surface has the lowest adhesion energy, followed by CNT/graphene and capped CNT/graphene surfaces. Our findings provide not only valid support to previous works but also reveal new theories on the wetting model of the metal droplet on the rough substrates.

In vitro and in vivo study of PCL/COLL wound dressing loaded with insulin-chitosan nanoparticles on cutaneous wound healing in rats model.

In the current study, insulin delivering chitosan nanoparticles were coated onto the electrospun poly (ε-caprolactone) (PCL)/Collagen (COLL) to produce a potential wound care material. Electrospun matrices were fabricated from PCL/COLL (1:1 (w/w)) solution. The insulin-loaded chitosan nanoparticles were produced by ionic gelation process and then attached onto the yarns. The dressings were investigated regarding their surface wettability, microstructure, the capacity to absorb water, water vapour permeability, mechanical properties, blood compatibility, microbial penetration, and cellular behavior. Full-thickness excisional wound model was used to assess the in vivo healing capacity of the dressings. Our data showed that after 14 days the wounds covered with PCL/COLL/Cs-Ins wound dressing could reach to nearly full wound closure compared with the sterile gauze which exhibited nearly 45% of wound size reduction. Our results suggest that fabricated scaffolds can be potentially applied in clinical practice for wound treatment.

Tribological evaluation of biomedical polycarbonate urethanes against articular cartilage.

This research investigated the in-vitro wear and friction performance of polycarbonate urethane (PCU) 80A as they interact with articular cartilage, using a customised multidirectional pin-on-plate tester. Condyles were articulated against PCU 80A discs (Bionate® I and Bionate® II) (configuration 1) and the results arising from these tests were compared to those recorded during the sliding of PCU pins against cartilage plates (configuration 2). Configuration 1 produced steadily increasing coefficient of friction (COF) (up to 0.64 ±â€¯0.05) and had the same trend as the cartilage-on-stainless steel articulation (positive control). When synovial fluid rather than bovine calf serum was used as lubricant, average COF significantly decreased from 0.50 ±â€¯0.02-0.38 ±â€¯0.06 for condyle-on-Bionate® I (80AI) and from 0.41 ±â€¯0.02-0.24 ±â€¯0.04 for condyle-on-Bionate® II (80AII) test configurations (p < 0.05). After 15 h testing, the cartilage-on-cartilage articulation (negative control) tests showed no cartilage degeneration. However, different levels of cartilage volume loss were found on the condyles from the positive control (12.5 ±â€¯4.2 mm3) and the PCUs (20.1 ±â€¯3.6 mm3 for 80 AI and 19.0 ±â€¯2.3 mm3 for 80AII) (p > 0.05). A good correlation (R2 =0.84) was found between the levels of average COF and the volume of cartilage lost during testing; increasing wear was found at higher levels of COF. Configuration 2 showed low and constant COF values (0.04 ±â€¯0.01), which were closer to the negative control (0.03 ±â€¯0.01) and significantly lower than configuration 1 (p < 0.05). The investigation showed that PCU is a good candidate for use in hemiarthroplasty components, where only one of the two articulating surfaces is replaced, as long as the synthetic material is implanted in a region where migrating cartilage contact is achieved. Bionate® II showed better tribological performance, which suggests it is more favourable for use in hemiarthroplasty design.

Evaluation about wettability, water absorption or swelling of excipients through various methods and the correlation between these parameters and tablet disintegration.

OBJECTIVE: To evaluate parameters about wettability, water absorption or swelling of excipients in forms of powders or dosage through various methods systematically and explore its correlation with tablet disintegration. MATERIAL AND METHODS: The water penetration and swelling of powders with different proportions of excipients including microcrystalline cellulose (MCC), mannitol, low-substituted hydroxypropyl cellulose (L-HPC), crospolyvinylpyrrolidone (PVPP), carboxymethyl starch sodium (CMS-Na), croscarmellose sodium (CCMC-Na) and magnesium stearate (MgSt) were determined by Washburn capillary rise. Both contact angle of water on the excipient compacts and surface swelling volume were measured by sessile drop technique. Moreover, the test about water absorption and swelling of compacts was fulfilled by a modified method. Eventually, the disintegration of tablets with or without loratadine was performed according to the method described in USP. RESULTS AND DISCUSSION: These parameters were successfully identified by the methods above, which proved that excipient wettability or swelling properties varied with the structure of excipients. For example, MgSt could improve the water uptake, while impeded tablet swelling. Furthermore, in the present study it is verified that tablet disintegration was closely related to these parameters, especially wetting rate and initial water absorption rate. The higher wetting rate of water on tablet or initial water absorption rate, the faster swelling it be, resulting in the shorter tablet disintegration time. CONCLUSION: The methods utilized in the present study were feasible and effective. The disintegration of tablets did relate to these parameters, especially wetting rate and initial water absorption rate.